分类: SIEMENS instabus

西门子KNX设备清单

2017/06/23 at 13:06分类:SIEMENS instabus

型号 中文产品描述
UP110/03 总线耦合器 BCU1.0
UP110/11 总线耦合器,带安装卡钳 BCU1.0
UP116 单联带中间位总线耦合器(配进口普通面板)
UP116/11 双联带中间位总线耦合器(配进口普通面板)
UP116/21 单联按钮式总线耦合器(配进口普通面板)
UP116/31 双联按钮式总线耦合器(配进口普通面板)
UP117/12 总线耦合器BTM new(原UP117停产)
AP118 AP118模块安装盒,可安装1个RS/RL模块  new
N120/02 600mA扼流器
N125/02 160mA带扼流总线电源 new(原 N125 停产)
N125/12 320mA带扼流总线电源 new(原 N125/11 停产)
N125/22 640mA带扼流总线电源 new(原 N125/21 停产)
N140/03 线路/区域耦合器  (1MW)
N140/13 线路/区域耦合器  (2MW)
N141/02 KNX EIB/DALI 网关
N141/21 KNX/DALI 双路网关 2X64 DALI镇流器单独控制/组控制, 32
感应器组控制,应急照明
N141/31 N141/31 KNX/DALI 双网关,2X64 DALI 镇流器,感应器和32个组
N143 N143 KNX/BACnet 网关
N146/02 KNX IP路由器
N146E11 USB接口,齐平安装,钛白色
N148/11 USB接口,导轨安装
N148/22 IP接口,导轨安装
N151 IP 浏览器
AP190 KNX系统过压保护器
AP193 总线连接端子
UP204/11 UP204 房间控制器CONTOUCH,  带2.8″LCD
UP204/21 UP204房间控制器   2,8″ LCD 彩色触摸显示屏,带旋钮,碳黑
UP204/31 UP204房间控制器   2,8″ LCD 彩色触摸显示屏,带旋钮,铝银
UP204/51 UP204房间控制器   2,8″ LCD 彩色触摸显示屏,带旋钮,钢琴黑
AP204 Contouch存储卡,SD适配器,SD/USB读取器
UP220/21 I/O 开关按钮接口, 2 I/O
UP220/31 I/O 开关按钮接口, 4 I/O
UP221D12 i-system \UP 221/2单联双键智能面板,钛白色
UP221D13 i-system \UP 221/3单联双键智能面板,带LED状态,钛白色
UP221D32 i-system \UP 221/2单联双键智能面板,铂金色
UP221D33 i-system \UP 221/3单联双键智能面板,带LED状态,铂金色
UP222D12 i-system \UP 222/2双联四键智能面板,钛白色
UP222D13 i-system \UP 222/3双联四键智能面板,带LED状态,钛白色
UP222D32 i-system \UP 222/2双联四键智能面板,铂金色
UP222D33 i-system \UP 222/3双联四键智能面板,带LED状态,铂金色
UP223D12 i-system \UP 223/2三联六键智能面板,钛白色
UP223D13 i-system \UP 223/3三联六键智能面板,带LED指示,钛白色
UP223D15 i-system \UP 223/5
三联六键智能面板,带LED状态,场景以及红外接收,钛白色
UP223D32 i-system \UP 223/2三联六键智能面板,铂金色
UP223D33 i-system \UP 223/3三联六键智能面板,带LED指示,铂金色
UP223D35 i-system \UP 223/5
三联六键智能面板,带LED状态,场景以及红外接收,铂金色
UP227/11 UP227/11 房间控制单元UP227电容触控LCD屏感应器钛白
UP237/11 UP237K, i-SYSTEM温度控制面板,钛白色  new
AP251/11 户外移动探测器,钛白,IP55
AP251/21 户外移动探测器,碳黑,IP55
UP254/13 UP254K, DELTA STYLE温度控制面板,钛白/银色  new
UP254K43 UP254K, DELTA STYLE温度控制面板房间温控器,铂金色
AP254/02 光线/温度复合传感器,户外安装
AP255/11 红外(IR)遥控器,适用于UP258E11,UP258E21
AP257/22 气象站,带GPS时间接收功能,可控制8路遮阳设备
AP257/32 WS1气象站,带GPS时间接收功能,可控制4路遮阳设备
AP257/42 风速感应器
N258/02 4路温度传感控制器,接PT1000温度传感器
UP258E22 UP258E22 KNX存在感应器,带恒照度控制
UP258D12 UP258D12 KNX存在感应器,带照度感应,适用于KNX S-mode和
KNX PL-Link  New
UP255D21 UP255D21 KNX照度控制器,适用于KNX S-mode和KNX PL-Link
New
N260 4路220V AC开关量输入模块
RL260/23 RL260/23 双值输入模块 4路 new
N261 4路24V AC/DC开关量输入输入模块
N261C01 5WG1261-1CB01  \双值输入4X24V AC/DC
N262E 8路双值输入,无源触点
N262E11 16路双值输入,无源触点
N263E 8路双值输入 12~230V AC/DC
N263E11 16路双值输入 12~230V AC/12~115V DC
N264E11 16路双值输入,8 x AC12…230V, 8 x 无源触点
UP285D12 Style \UP 285/2单联双键智能面板,钛白色
UP285D13 Style \UP 285/3单联双键智能面板,带LED状态,钛白色
UP285D42 Style \UP 285/2 单联双键智能面板,铂金色
UP285D43 Style \UP 285/3 单联双键智能面板,带LED状态,铂金色
UP286D12 Style \UP 286/2 双联四键智能面板,钛白色
UP286D13 Style \UP 286/3 双联四键面板,带LED指示,钛白色
UP286D42 Style \UP 286/2 双联四键智能面板,铂金色
UP286D43 Style \UP 286/3 双联四键面板,带LED指示,铂金色
UP287D12 Style \UP 287/2 四联八键智能面板,钛白色
UP287D13 Style \UP 287/3 四联八键智能面板,带LED状态,钛白色
UP287D15 Style \UP 287/5
四联八键智能面板,带LED状态,场景/红外接收,钛白色
UP287D42 Style \UP 287/2 四联八键智能面板,铂金色
UP287D43 Style \UP 287/3 四联八键智能面板,带LED状态,铂金色
UP287D45 Style \UP 287/5
四联八键智能面板,带LED状态,场景/红外接收,铂金色
S290/11 5WG1290-7AB11  \S 290 门-/窗磁,白色
S294 5WG1294-8AB01  \安装支架
N301 逻辑模块(会议室分割,逻辑,强制驱动功能)
N305 场景和时间控制模块
N350E N350E IP控制器
AP425/72 红外手持遥控器,银色
AP450/03 红外解码器
N501 4路组合电动遮阳帘驱动器,8路输入(AC/DC 12~230V)
N502/02 8路组合开关执行器,8O  / 8 Input(AC/DC)
N510/03 4路开关执行器,4*16A,带手动  (容性负载)
N510/04 4路开关执行器,4*16A,带手动  (容性负载)
UP510/03 UP510/03 双值输出,2X 10A, AC 230V,带安装支架和BTM接口
UP510/13 UP510/13 双值输出,2X 10A, AC 230V,无安装支架
RS510/23 RS510/23 双值输出,2X 10A, AC 230V  new
N511/02 8路开关执行器,8*16A,带手动 (阻性负载),需220V
UP511/10 单路开关执行器,1*16A  ,带两路输入
N512 8路开关执行器,8*16A,带手动 (容性负载),不需220V,磁保持继电器
N512/11 开关执行器主模块,3*16A,230V/400V,可接4个子模块
N512/21 开关执行器子模块,3*16A,230V/400V
N512C 8路开关执行器,8*20A,带手动 (容性负载)
UP512/23 UP512/23 开关执行器,1X 16AX, AC 230V
1X 15A, AC277V / AC 347V
N513/11 开关执行器主模块,3*20A,230V/400V,可接4个子模块
N513/21 开关执行器子模块,3*20A,230V/400V
UP520/03 UP520/03窗帘执行器,1X  6A, AC 230V ,带安装支架和BTM接口
UP520/13 UP520/13窗帘执行器,1X  6A, AC 230V ,无安装支架  new
RS520/23 RS520/13窗帘执行器,1X  6A, AC 230V   new
UP520/31 UP520/31窗帘执行器,1*6A,带两路双值输入
N521 2路电动遮阳帘执行器,2*6A
RL521/23 RL521/23 窗帘执行器,2X 6A, AC 230V  new
N522/03 4路电动遮阳帘执行器,4*8A,带手动控制
N523/02 4路电动遮阳帘执行器,4*6A,带手动控制
N523/03 4路电动遮阳帘执行器,4*6A,带手动控制
N523/04 4路电动遮阳帘执行器,4*6A,带手动控制
N523/11 8路电动遮阳帘执行器,8*6A,带手动控制
N523C04 5WG1523-1CB04  \窗帘执行器 4X120V AC
N525E 8路DALI数字调光控制器
UP525/03 UP525/03 通用调光执行器 1X 250W, AC 230V,
带安装支架和BTM接口
UP525/13 UP525/13 通用调光执行器 1X 250W, AC 230V, 无安装支架
RS525/23 RS525/23 通用调光执行器 1X 250W, AC 230V   new
UP525/31 UP525/31通用调光器,210W,带2路双值输入
N526/02 3路1-10V调光控制器,3*6A
N526E02 8路1-10V调光控制器,8*16A
N527/31 N527/31 通用调光器主模块,  20~500VA, 230V AC
N527/41 N527/41 通用调光器子模块,  20~500VA, 230V AC
N527/51 N527/51 通用调光器子模块,20~1000VA, 230V AC
N528/31 N528/31 通用调光器主模块,  20~300VA, 230V AC
N528/41 N528/41 通用调光器子模块,20~300VA, 230V AC
N528D01 N528D01 通用调光器子模块,2*300VA / 1*500VA, 230V AC
N562 双值输出模块,2*10A,230V AC
N562/11 开关执行器主模块,3*10A,230V/400V,可接4个子模块
N562/21 开关执行器子模块,3*10A,230V/400V
UP562/31 2路开关执行器,2*6A  ,带两路输入
N567 4路开关执行器,4*8A,带手动
N567/11 8路开关执行器,8*8A,带手动
N567/12 8路开关执行器,8*2A,带手动
N567/22 16路开关执行器,16*10A,带手动
UP580E01 UP580E SiPanel 智能控制终端
UP580E11 UP580E11 SiComm 单用户门口机
UP580E21 UP580E21 MultiComm 多用户门口机
AP580E01 UP580E01安装底盒
AP580E11 UP580E11安装底盒
AP580E21 UP580E21安装底盒
UP588/13 彩色触摸屏, 230V AC
UP588/23 彩色触摸屏, 24V AC/DC
AP588/12 彩色触摸屏装饰框,铝合金
AP588/13 彩色触摸屏装饰框,不锈钢
AP588/14 彩色触摸屏装饰框,黑玻璃
AP588/15 彩色触摸屏装饰框,白玻璃
AP588E01 彩色触摸屏安装底盒
AP641 AP641房间控制盒,可安装8个RS/RL模块
LS500 SM-IT-LS500    \SerPro 扩展包 500点
SR200 SM-IT-SR200    \SerPro服务器软件-中型版本
SR500 SM-IT-SR500    \SerPro服务器软件-大型版本
SI-APP SM-SI-APP \SiPanel无线扩展软件
N152 N152 IP控制中心
UP201/12 ARINA 触控面板单联双键,带方向指示LED,纯白
UP201/32 ARINA 触控面板单联双键,带方向指示LED,香槟色
UP201/13 ARINA 触控面板单联双键,带方向指示和状态反馈LED,纯白
UP201/33 ARINA 触控面板单联双键,带方向指示和状态反馈LED,香槟色
UP202/12 ARINA 触控面板双联四键,带方向指示LED,纯白
UP202/32 ARINA 触控面板双联四键,带方向指示LED,香槟色
UP202/13 ARINA 触控面板双联四键,带方向指示和状态反馈LED,纯白
UP202/33 ARINA 触控面板双联四键,带方向指示和状态反馈LED,香槟色
UP203/12 ARINA 触控面板四联八键,带方向指示LED,纯白
UP203/32 ARINA 触控面板四联八键,带方向指示LED,香槟色
UP203/13 ARINA 触控面板四联八键,带方向指示和状态反馈LED,纯白
UP203/33 ARINA 触控面板四联八键,带方向指示和状态反馈LED,香槟色
UP203/14 ARINA 触控面板四联八键,带方向指示和状态反馈LED,场景控制,温度 感应,纯白
UP203/34 ARINA 触控面板四联八键,带方向指示和状态反馈LED,场景控制,温度 感应,香槟色
UP203/15 ARINA 触控面板四联八键,带方向指示和状态反馈LED,场景控制,红外 接收,纯白
UP203/35 ARINA 触控面板四联八键,带方向指示和状态反馈LED,场景控制,红外 接收,香槟色
RXZ97.1 RXZ97.1 KNX/EnOcean 网关
AP221/10 EnOcean无线控制面板,单联,钛白
AP221/30 EnOcean无线控制面板,单联,铝银色
AP221/11 EnOcean无线控制面板,单联,带I/O标志,钛白色
AP221/31 EnOcean无线控制面板,单联,带I/O标志,铝银色
AP221/12 EnOcean无线控制面板,单联,带上/下标志,钛白
AP221/32 EnOcean无线控制面板,单联,带上/下标志,铝银色
AP222/10 EnOcean无线控制面板,双联,钛白
AP222/30 EnOcean无线控制面板,双联,铝银色
AP222/11 EnOcean无线控制面板,双联,带I/O标志,钛白色
AP222/31 EnOcean无线控制面板,双联,带I/O标志,铝银色
AP222/12 EnOcean无线控制面板,双联,带上/下标志,钛白
AP222/32 EnOcean无线控制面板,双联,带上/下标志,铝银色
QAX95.4 QAX95.4 EnOcean 无线房间控制器
QAX96.4 QAX96.4 EnOcean 无线房间控制器
QAX97.4 QAX97.4 EnOcean 无线房间控制器
QAX98.4 QAX98.4 EnOcean 无线房间控制器
DELTA style控制面板右键
DELTA style控制面板左键
开关子模块的桥接器

IP Gateway KNX-BACnet N 143/01

2015/04/22 at 12:11分类:SIEMENS instabus

V BACnet Application Specific Controller (B-ASC) as Gateway between KNX TP and BACnet IP
V Up to 250 BACnet objects
V Up to 455 BACnet COV subscriptions
V Automatic translation of KNX communication objects into BACnet objects according to the configuration
with ETS
V For communication between KNX EIB devices and PCs or other devices with Ethernet (10BaseT) interface‚
as well as in conjunction with a LAN modem or DSL router for remote access to an KNX EIB installation
V For use as an interface e.g. for ETS3 or for visualization software
V Use the KNXnet/IP protocol
V Up to four KNXnet/IP Tunneling connections for parallel bus access by ETS and further PC software
V ObjectServer connection for visualization via network connections with long signal transmission duration
V Assignment of the network parameters by the installer using ETS‚ or automatically by a DHCP server
in the network
V 2 LEDs for display of operational availability and IP communication
V Additional power supply by an external safety extra low voltage power supply for DC 24 V
V Pluggable terminal block for connection of external power supply unit (not included)
V Integrated bus coupling unit with bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Mounting on DIN rail EN 60715-TH35-7.5

IP Control Center N 152/01

2015/04/22 at 12:11分类:SIEMENS instabus

Visualization controller for full-graphic visualizations on web-compatible end devices such as PCs‚ laptops‚
tablets and smart phones with a standard web browser.
V Web server to operate and monitor up to 250 transmitted operation states and values
V Web editor for graphic engineering of web visualization and application modules such as:
– Scheduler program with up to 300 editable commands per week
– Scene module with up to 5‚000 scenes or events
– Full-graphic logic module providing up to 1‚000 logic functions
– Alarm function for up to 250 different alarm messages
– E-mail function with up to 20 contacts
V Special web site relating to firmware upgrade
V KNXnet/IP interface to parameterize a KNX plant
V Ethernet interface 10/100 Mbits/s with RJ45 socket for connection to the IP network through the internet
protocol
V 2 LEDs for indication of IP connection/communication and error messages
V Built-in bus coupler and bus terminal for connection to a KNX network
V Power supply for electronics via external DC 24 V power source. Connection of external power source
via low-voltage terminal
V Device for top hat rail mounting on TH35 rails conforming to DIN EN 60715

IP viewer N 151/01

2015/04/22 at 12:10分类:SIEMENS instabus

Interface converter between a KNX and an IP network‚ with the following simultaneously executable
functions:
– As a WebServer for monitoring and control of up to 40 states and values transmitted via the KNX network‚
which can be displayed on up to 5 image pages of a PC connected to the IP network using Internet
Explorer 6.0‚ 7.0‚ 8.0 or Firefox 3.0 (for other browsers‚ see documentation at www.siemens.
com/gamma-td)
– For the parameterization of a KNX system using ETS3.0f/ETS4
– For communication between the KNX network and a ComBridge Studio visualization software
V Special WEB page for the multilanguage adaptation of the presentation of an image page and a special
WEB page for firmware upgrades
V Ethernet interface for connection to the IP network using the Internet Protocol
V RJ45 socket for connection to Ethernet 10 Mbits/s
V 2 LED displays for indication of ready-to-run state and for IP communication
V Integrated bus coupling units
V KNX bus connection via bus terminal
V Electronics powered via an external 24 V AC/DC power supply unit
V Connection of external power supply unit via an extra-lowvoltage terminal
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

IP controller N 350E01

2015/04/22 at 12:09分类:SIEMENS instabus

V LEDs for indicating that the device is ready-to-run‚ KNX communication‚ IP communication
V LC-Display
V Electronics powered via an external nominal 24 V AC/DC power supply unit
V Integrated bus coupling units
V Bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Plug-in terminal block for the connection of an external power supply unit
V Supports KNXnet/IP
V 1 Interface functions (Tunneling)
V 1 Interface functions (object server)
V Integrated real-time clock weekly scheduling program for 100 scheduled entries/Astro function
V Yearly time switching functions
V 200 Event entries
V 30 Logic gates
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

The external 24 V AC/DC power supply unit must be ordered separately (e. g. 4AC2402).

IP interface N 148/22

2015/04/22 at 12:08分类:SIEMENS instabus

V LEDs for indicating that the device is ready-to-run‚ KNX communication‚ IP communication
V Electronics powered via an external nominal 24 V AC/DC power supply unit
V Power consumption at 24 V DC‚ 57 mA
V Power supply for the electronics via “Power over Ethernet” according to IEEE 802.3af
V Integrated bus coupling units‚ Bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Plug-in terminal block for the connection of an external power supply unit
V Supports KNXnet/IP
V 4 Interface functions (Tunneling)
V 1 Interface functions (object server)
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

IP router N 146/02

2015/04/22 at 12:08分类:SIEMENS instabus

V LEDs for indicating that the device is ready-to-run‚ KNX communication‚ IP communication
V Electronics powered via an external nominal 24 V AC/DC power supply unit
V Power consumption at 24 V DC 57 mA
V Power supply for the electronics via “Power over Ethernet” according to IEEE 802.3af
V Integrated bus coupling units
V Bus connection via bus terminal
V Ethernet connection via RJ45 socket
V Plug-in terminal block for the connection of an external power supply unit
V Supports KNXnet/IP
V Line coupler function (Routing)
V 4 Interface functions (Tunneling)
V 1 Interface functions (object server)
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

Line/backbone coupler N 140/03 N 140/13

2015/04/22 at 12:06分类:SIEMENS instabus

V For data exchange between two KNX bus lines with telegrams of up to 64 byte
V For use as line coupler for connecting a line to the main line or as backbone coupler for connecting a
main line to the backbone line or as repeater for connecting two segments of the same line‚ with electrical
isolation of the two bus lines
V Loadable filter table for control of the data exchange between the two bus lines
V Additional loadable filter table for telegrams with LTE addressing
V Detection of a communication fault on the lower-level line and signaling to the higher-level line
V 3 LEDs for display of availability and receipt of a telegram per line
V Power supply from the main line
V Modular installation devices for mounting on TH35 EN 60715 mounting rail

 

Dimension width (1 MW = 18 mm) 1 MW
Bus connection Via bus terminal
Via data rail

Pushbutton with scene controller and IR receiver decoder‚ i-system

2015/04/22 at 12:03分类:SIEMENS instabus

Product Title Stock No. Product No.
Pushbutton‚ triple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ titanium
white
5WG1223-2DB15 UP 223/15
Pushbutton‚ triple‚ with status LED‚ with scene controller‚ with IR receiver decoder‚ aluminum
metallic
5WG1223-2DB35 UP 223/35

The bus transceiver module (BTM) (see Chapter System Products and Accessories) or flush-mounting actuator with bus transceiver module
(BTM) must be ordered separately. The matching design frame must be ordered separately. See Chapter Display and Operation Units – Pushbutton
accessories.
IR remote controls and IR wall-mounted transmitters must be ordered separately. See chapter Display and Operation Units – Remote controls.

 

USB interface N 148/11

2015/04/22 at 12:01分类:SIEMENS instabus

V Electronics powered via bus voltage or via USB by a connected PC
V Integrated bus coupling units
V Bus connection via bus terminal or contact system to data rail
V Transmission PC D USB USB 1.1 or higher
V Electrically isolated access to the bus line via integrated socket USB (Typ B)
V Access to all bus devices in the system
V Modular installation devices for mounting on TH35 EN 60715 mounting rail